TruTool C 160 chip clipper, 12V LiHD rechargeable battery

Handy battery-powered machine with chip clipper

The TruTool C 160 12V LiHD rechargeable battery with integrated chip clipper for two-handed operation is ideal for notching work and interior cutouts of up to 1.6 mm in mild steel and 1.2 mm in stainless steel. It enables you to clip chips at any point. The cuts are free of deformation and of high quality, and the 4.0 Ah / 12V LiHD rechargeable battery guarantees long runtimes.

Kategorier: Batteridrevne verktøy, Platesaks

Produktbeskrivelse

Chip cutter for two-handed operation
The chips are clipped with a three-quarter clockwise turn by means of a lever

Easy and safe operation
A soft grip ensures a secure hold and enables low-vibration operation

Power-Head Technology
The battery-optimized gear head enables the battery to achieve an above-average runtime.

For interior cutouts and notches
You can cut chips at any time and pull the machine out of the workpiece.

Technical data

Scope of delivery

The following consumables and the corresponding accessories are included in the scope of delivery.

TruTool C 160, Messer 1 - 1,6 mm

Straight cutter (integrated)

TruTool C 160, Schneidleistensatz

Cutting strip set, 2 units with screws (integrated)

Set of 2 0927708

TruTool C 160, Spanabtrenner

Chip clipper (integrated)

1 unti 1884910

Zubehör Standbild

Allen key DIN 911 - 2.5

1 unti 0067822

TruTool Li-ion rechargeable battery 10.8 V, 2 Ah

12V LiHD 4.0 Ah rechargeable battery (2 units)

1 unti 2598770

TruTool charger 100 - 240 V

LG 12V-36V recharger

1 unit, DE/CH version: 2569784

TruTool belt clip

Belt clip

1 unti 2579850

TRUMPF Box S1

TRUMPF Box S1

1 unit 1763681

Accessories

Find the right consumables and accessories for your machine here.

TruTool C 160, cutter 0.039 - 0.063 in

Straight cutter 1 - 1.6 mm

Ideal for sheet thicknesses of 0.39 - 0.63 in.

Set of 2 1264343

Set of 5 1264345

TruTool C 160, cutter up to 1 mm

Straight cutter up to 1 mm

Ideal for sheet thicknesses up to 0.4 in.

Set of 2 1264356

Set of 5 1264357

TruTool C 160, cutter CR

Cutter CR

Ideal for stainless steel and spiral ducts

Set of 2 1264346

Set of 5 1264347

TruTool C160, cutter set (straight cutter, curve cutter)

Cutter set

1 x straight cutter 1 mm, 1 x curve cutter

Set of 1 913521

TruTool C 160, cutting strip set

Cutting strip set

2 units with screws

Set of 1 927708

TruTool C 160, chip clipper

Chip clipper

For interior cutouts and notches

1 unit 1884910

Set of 2 1264370

TruTool C 160, spare parts set

Spare parts set

1x cutting strip set, 1x chip clipper

Set of 1 927709

LG 12V-36V recharger

LG 12V-36V RECHARGER

For 12V and 18V LiHD rechargeable battery

1 unit (GB) 2569786

12V LiHD 4.0Ah rechargeable battery

12V LIHD 4.0AH RECHARGEABLE BATTERY

1 unit 2598770

Belt clip

BELT CLIP

Suitable for the 12V LiHD battery machines

1 unit 2599016

TruTool C 160, curve cutter

CURVE CUTTER

Good performance cutting curves. For sheet thicknesses up to 0.039 in.

Set of 2 1264358

Set of 5 1264359

Customer benefits

Image of the technology inside the TRUMPF battery-powered machines

Power-Head Technology

The light metal gear head's ingenious design is specially adapted to the low voltage battery technology. Decoupling the motor pinion from the motor minimizes energy loss and ensures even higher performance per battery charge.

Brushless motor

The powerful BL motor generates higher torques than conventional motors, requires less power and generates hardly any heat. This positively affects battery performance and means you get the maximum from every battery charge. A further advantage is the practically limitless service life of a BL motor due to the absence of carbon brushes and therefore no mechanical wear. This means almost wear-free and maintenance-free motors.

Image of the technology inside the TRUMPF battery-powered machines

Small and handy

The 12V rechargeable battery tool has a lightweight design enabling fatigue-free working. The soft grip ensures safe and low-vibration working. All TRUMPF rechargeable battery tools are also available as stand-alone versions, i.e. without rechargeable batteries and recharger. If you already have CAS batteries available, you then have the option to save on resources and cut costs.

Battery-powered machine, speed control

Optimal working speed

You can use the speed controller to adjust the working speed to suit the individual cutting task. This provides a variable cutting speed of up to 29.5 feet per minute. The speed controller is highly efficient for work with scribed lines or with a template. It is also well-suited to frequent processing of radii and stainless steel. The electronic overload protection offers yet another notable benefit.