The TruTool S 350 features cutter height adjustment without the need for tools. You can adjust the height easily with a rotary knob, without an additional tool. The TruTool S 350 impresses with its ability to cut the smallest radii from 1.2 inches, resulting in high performance when cutting curves. With the TruTool S 350, you can cut mild steel with thicknesses up to 0.14 inches.
Extremely user-friendly The bow-handle, for one-hand and two-hand operation, ensures reliable machine control.
Adjustment without the need for tools The cutter height adjustment enables individual adaptation to the sheet thickness.
21 feet per minute You can progress quickly with your work. This is particularly advantageous when processing large sheets.
Long service life The cutters each have two cutting edges and can be used either at the top or bottom.
Technical data
Scope of delivery
The following consumables and the corresponding accessories are included in the scope of delivery.
Cutter
Integrated
Allen key DIN 911-2
1 unit 0002946
Allen key DIN 911-5
1 unit 0067857
Feeler gauge
1 unit 0056856
Grease gun, filled with "G1"
1 unit 1369906
Tube of grease "G1", 0.88 oz
1 unit 0344969
TRUMPF Box M2
1 unit 1770890
Accessories
Find the right consumables and accessories for your machine here.
Cutter
For steel up to 400 N/mm2
Set of 2 140451
Cutter CR
For high-tensile sheets up to 800 N/mm2
Set of 2 140452
Work station with pedestal
For the stationary processing of small workpieces and wire grids
1 unit 918382
Workstation without pedestal
For the stationary processing of small workpieces and wire grids.
1 unit 979371
Pedestal
Pedestal for work station
1 unit 3677
TRUMPF Box M2
1 unit 1770890
Customer benefits
Height adjustment without tools
The handy marking points on the rotary knob make it easy to adjust the cutters, for curves or straight cuts. The perfect setting is available for every application and sheet thickness. This facilitates sheet metal processing, enabling you to work effortlessly.
2-way blade rotation
You can achieve high-quality cutting results due to the secure cutter attachment. If the cutting performance decreases, you can rotate the cutter by 180° and continue the work procedure with a new cutting edge. The result is optimum cut quality, combined with a long tool life.
Optimal working speed
An easy-to-use speed controller on the motor regulates the stroke rate and adapts to the respective application. This is particularly well-suited for working with scribed lines, where radii and stainless steel are frequently processed. Reducing the stroke rate achieves the optimal torque, especially for processing sheet thicknesses from 0.16 inches. Lower speeds are recommended for cutting stainless steel. The speed controller can be used to adjust the working speed in line with the respective working situation.
2-way blade rotation
